Men's Summit Shell Jacket

When you are out for the day in the mountains you never know what type of weather you will encounter. Luckily, the ultralight 110g Summit Jacket packs up small enough to go with you on every ride, providing reliable wind and water protection, without sacrificing ventilation. The hood is thin enough to fit easily under your helmet. An easy to operate premium two-way YKK Vislon® zipper can be quickly zipped up from the bottom to vent while climbing, avoiding excessive flap. Best of all, when things clear up you can stuff it back into the included envelope pocket.

• Barrier Lite fabric is lightweight and windproof
• Eco-friendly C6 water resistant DWR treatment sheds precipitation
• Hood designed to fit under-helmet without interfering with fit
• Two-way YKK Vislon® front zipper for easy venting
• Interior envelope pocket doubles as stuff pocket to pack jacket
• Packs down small enough to fit in a jersey pocket or disappear into a pack
• BioViz® reflective elements for low-light visibility

USE SIMPLE DETERGENTS WITH NO ADDITIVES Never use detergents with fabric softeners, perfumes or any additive type product. The general rule of thumb is the simpler the better. Many detergents with additives leave "surfactants" behind on a fabric's fibers that inhibit the technical performance. Typically the best detergents to use will have "Clear" or "Free" in their names. Don't pour the detergent directly onto the clothing, put it in the washer first, when you start the water. If something is not functionally working, but is not dirty, try rinsing it twice in warm to hot water. This will help get rid of the harmful surfactants. READ THE CONTENT CARE LABEL: On the inside of your garment, or on the hangcard, there are instructions for the care of that individual piece. On garments this will be on a side seam or back seam label. Follow those directions. On finer fabrics, use a "Gentle" cycle. Close all zippers, attach "hook and loop" closures on gloves YOU CAN USE THE DRYER, CAREFULLY: If you use a dryer be sure to use a lower / warm heat setting (Do NOT use a commercial dryer or a "Hot" setting). This will often restore the fabric and help the water and wind repellent qualities. If in doubt, hang the clothing to dry.